HOME | CONTACT US
 
WHAT'S NEW PRODUCTS CATALOGS HOT ITEMS
Home » Muzzleloaders » MODEL S50YSM - .50 CAL STAINLESS STEEL YOUTH MUZZLELOADER ...  BACK
MODEL S50YSM - .50 CAL STAINLESS STEEL YOUTH MUZZLELOADER WITH BLACK WOOD FINISH
 
Newest to the family are the youth-sized Rossi MiniLoader muzzleloading rifles in either .45 or .50 caliber. These are full featured versions of the Rossi inline muzzleloading rifle, but scaled down for the smaller shooter. The Rossi MiniLoaders feature a Monte Carlo style stock and all Rossi muzzleloading rifle barrels are drilled and tapped to accept a scope mount base. These firearms incorporate the transfer bar mechanism and manual safety on a single shot, break-open design. The breech cannot be closed or opened if the hammer is cocked. Add that to the safety inherent in single shot long guns and you have the perfect shooting platform for training. Our patented trigger block is also included at no extra charge for safer storage. THE ROSSI MUZZLELOADING RIFLE HAS A RECEIVER THAT CAN BE FITTED WITH A CENTERFIRE OR RIMFIRE CARTRIDGE BARREL. THEREFORE, IT IS A FIREARM. ALL REGULATIONS GOVERNING THE SALE, SHIPMENT AND TRANSFER OF FIREARMS MUST BE FOLLOWED INCLUDING, BUT NOT LIMITED TO, USE OF FORM 4473 BY LICENSED DEALERS AND THE USE OF LICENSED DEALERS FOR SHIPMENT.
Ram Rod
Included with Muzzleloader is the collapsible brass and wood ram rod that tucks neatly in the forend when not in use. The conical shaped tip is specifically designed to fit the Barnes copper sabot bullet. The tip also has an industry standard 10/32" fitting on the end so that you can use almost all of the loading, clearing and cleaning tips that are available.
Model: S50YSM   Status: Discontinued   Construction: STEEL  
Caliber: .50 CAL   Forearm: BLACK WOOD FINISH   Chamber:: N/A  
Choke: N/A   Capacity: SINGLE SHOT   Barrel Length: 20"  
Action: BREAK OPEN   Finish: STAINLESS STEEL   UPC: 6-62205-21315-1  
Grips Stock: BLACK WOOD FINISH   Style: YOUTH   MSRP: $242.00  
Weight: 5 LBS.  
  Name: Hammer Extension   Description:

Allows for easy hammer pull with scope mounted on barrel. Warning - Be very careful when cocking or decocking (lowering) hammer with hammer extension. Always keep the hammer/extension under full control. Failure to do so may cause an accidental discharge resulting in property damage, accidental death or serious injury.

 
Manufacturer Part No:
Manufacturer: Rossi
UPC: 6-62205-00007-2
Timi Part No: P701
Estimated Price: $6.50
  Name: Telescoping Ram Rod   Description:
Custom made collapsible brass and wood ramrod that tucks neatly into the forend of the muzzleloader when not in use. Warning - You should never attempt to put the ramrod into the barrel until you have verified that the safety is on, there is no primer and the breech is open. Be sure to remove the ramrod from the barrel before firing. If the gun is fired with a ramrod inside the barrel you will damage your firearm and can cause accidental death or serious injury.
 
Manufacturer Part No:
Manufacturer: Rossi
UPC: 6-62205-00004-1
Timi Part No: P501
Estimated Price: $21.95
  Name: Breach Plug Wrench   Description:
Breach plug wrench for removing muzzleloader breach plug. Warning - Be sure there is no primer present in the breech plug before applying the wrench. Attempting to use the wench with a primer in place may damage the firearm and can result in accidental death or serious injury.
 
Manufacturer Part No:
Manufacturer: Rossi
UPC: 6-62205-00005-8
Timi Part No: P502
Estimated Price: $9.95
  Name: Breech Plug   Description:

Fully removable breech plug for safety and convenience. The breech plug holds the 209 shotgun primer used to ignite the charge. Warning - Before using your breech plug for the first time, it is very important that you perform the following steps. Failure to do so may damage your firearm and can result in accidental death or serious injury. 1. Using a cleaning rod and a patch, make sure the barrel is clear of all oil. 2. Once the barrel is clean, apply a very light coating of oil to the threads of the breech plug and replace in breech, tightening securely. It is necessary to recoat the threads with oil regularly to ensure easy removal.

 
Manufacturer Part No:
Manufacturer: Rossi
UPC: 6-62205-00006-5
Timi Part No: P503
Estimated Price: $30.95
  Name: Youth Size Carry Case   Description:
Youth size custom carrying case with three individual pockets. Conveniently stores Rossi long guns in taken down condition.
 
Manufacturer Part No:
Manufacturer: Rossi
UPC: 6-62205-00001-0
Timi Part No: 6-0008
Estimated Price: $29.95